QoS/ bandwidth limiting.

[eiregobragh]

Hi all,
I'm trying to set up a QoS policy whereby traffic coming from a certain Vlan is limited to 192k on the WAN interface of a 4507R.

Can anyone help with the code here please as I'm fairly clueless and this is urgent????

Many thanks,

Paul

 

[lobo66]

Figured it out thanks for the input anyways.

In global config you need to add the following code:
hw-module module 2 port-group 1 select gigabitethernet

Only down fall is now all the 8 ports are throttled to 1 Gig, and or 2 Gig when using the TwinGig converter.

 

[eiregobragh]

Lobo66 I think you posted your reply in the wrong thread.

Is there anyone able to help me with my QoS issue?

Regards,

Paul

Paul Kilcoyne B. Eng.
Innealtóir/ Engineer

http://www.pknetworks.ie

 

[Deepseadata]

Hey dude,

I've got the same task to do right now, too.

What I read in the manual was that maybe we can create an IP class by using an ACL. Then apply a policy to that IP range (IP class)... or something like that.

I came back to tektips because it confuses me though.

I wonder if I'm on the right path.

I found it in the Cisco 3560 Software Config Manual pdf.

 

[lerdalt]

eiregobragh, didn't this post help?

http://www.tek-tips.com/viewthread.cfm?qid=1507353&page=4

What is the confusing part? Or what's not working?