PWR000 message

[hhhhkk]

I am keeping getting these message since yesterday. any ideas? Thank you in adavance.
PWR000 PWSP 00 3 2

PWR003 PWSP 00 3 2

 

[acewarlock]

PWR0000 hw System Monitor or power supply is OK. Output may be:
PWR0000 XSMC — System Monitor is OK
PWR0000 PWSP — Power unit is OK


PWR0003 Power supply not installed or has been removed.


Is this an Option 11C? May be a Bad Fiber between Cabs.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[hhhhkk]

It is 61C

 

[phonz1]

check your ring generator on column 0, shelf 3, or the top shelf

 

[hhhhkk]

What kind problem am I looking for? Alarms?

 

[hhhhkk]

I checked both ring generator. The lights are green.

 

[phonz1]

disable your XSM and reseat it.... but first, are you still getting the alarms??

 

[Triton101]

Like Phonz1 said, looks like a Ring generator on that shelf. You might want to call some analog lines on that shelf and see if they ring (clip butt set to the tns on the frame and call the tns).