Putty is just closed after type the nnadmin

[NAA9983]

Dears,

I have BCM 400 R 4.0, and I have re-image the HDD, now I need to initialize the profile, via Putty, so after the BCM 400 finish the booting process, I open ssh session via Putty, and enter the IP of the BCM, and then I type the user name: nnadmin, once I press enter the Putty just closed.

The IP and the user name are correct, because I can log in from the element manager using the default configuration, so why putty keep closing ???

Thanks in Advance & Best Regards

 

[telcodog]

What happens when you use hyperterminal?

 

[NAA9983]

it works as hyper terminal, but in hyper terminal, I didn't get the initialization menu, in hyper terminal all I got is the IP fpr the two ports and shutdown,

 

[exsmogger]

Are you trying to connect to port 22 with PuTTY?

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[Firebird Scrambler]

I didn't think that you could access a BCM 400 at 4.0 via puTTY using nnadmin?. I thought that you could only use the Avaya support account of nnsupport.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[curlycord]

NAA9983
What is status/resolution?

Thanks



=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[gberger]

Once your hard drive is re-imaged you just have to put it in the bcm and it will come up within 10 minutes.
Initialing a drive was done on versions 3.7 and before.

 

[SupportDude]

There is no Putty access on BCM 4.0 unless you use nnsupport and the password of the day.
In other words, only Avaya support can access.

BCM 4.0 HDD's will initialize automatically.
There is no need to access the command line.
Attach a laptop to the serial port (null modem cable) and connect with hyperterm (8N1, no flow) and you can watch the entire process.

-SD-

http://www.mysupportguy.net

 

[NAA9983]

Thanks all for your answers, I didn't know that only avaya can have the access.

 

[exsmogger]

I was thinking of the BCM 450, which does have PuTTY access. The BCM 200, 400 & 1000 are initialized through the serial port.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952