Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Putting pauses in auto dialer numbers

Status
Not open for further replies.
dabble

dabble

Technical User
Jun 15, 2005
594
CA
I have CS1000M at 4.5.
Using 1140e IP phones.
Is it possible to put a pause into an auto dialer key on a set?
Thanks.
 
Sort by date Sort by votes
HAVE YOU TRIED *

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
Upvote 0 Downvote
Tried that - no luck.
Tried # - no luck either.
 
Upvote 0 Downvote
We have never been able to use pause in an auto dial string. We use multiple keys to get the call out.

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!
 
Upvote 0 Downvote
You can't use a * as a pause if the call goes out a PRI since the digits (including the *) are sent enbloc (all at once). The PRI is expecting to see a specific number of digits depending on the type of call and a * is considered valid.

But, you can put a pause in a personal directory entry.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Everest67
  • Locked
  • Question
Active station numbers unknown if actually used on end user side
Replies
1
Views
253
Firebird Scrambler
Firebird Scrambler
Michael.D
  • Locked
  • Question
CS1000 - Auto attendent/VM 1
Replies
3
Views
222
Firebird Scrambler
Firebird Scrambler
SherWat
  • Locked
  • Question
ENTC in LD 80 Results Decipher
Replies
0
Views
319
SherWat
SherWat
MoJHK
  • Locked
  • Question
Nortel Basic ACD in CDR
Replies
0
Views
209
MoJHK
MoJHK
Alfordap
  • Locked
  • Question
Extra numbers added to the called DN on Tie trunks
Replies
6
Views
324
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top