Punch down layout for BRI LINE TN2198

[ARCOER]

Thanks in advanced. Can anyone tell me where I can find the punch down layout to connect BRI LINE TN 2198 to a 66 block? I am trying to find which pairs to punch down to to connect to the ports that I have assigned to the ISDN lines.

 

[mikeydidit]

This should get you there.

Pin
Numbers       2 Wire	4 Wire
BRI	BRI
Line	Line
TN2198	TN556
T1	PXT1
R1	PXR1
T2	TXT1
R2	TXR1
T3	PXT2
R3	PXR2
T4	TXT2
R4	TXR2
T5	PXT3
R5	PXR3
T6	TXT3
R6	TXR3
T7	PXT4
R7	PXR4
T8	TXT4
R8	TXR4
T9	PXT5
R9	PXR5
T10	TXT5
R10	TXR5
T11	PXT6
R11	PXR6
T12	TXT6
R12	TXR6
	PXT7
	PXR7
	TXT7
	TXR7
	PXT8
	PXR8
	TXT8
	TXR8
	PXT9
	PXR9
	TXT9
	TXR9
	PXT10
	PXR10
	TXT10
	TXR10
	PXT11
	PXR11
	TXT11
	TXR11
	PXT12
	PXR12
	TXT12
	TXR12
GRD	GRD
GRD	GRD

When is the last time you helped someone, just because you were able to?

For the best response to a question, read faq690-6594

 

[AvayaTier3]

The first 12 pairs in the cable are circuits 01 - 12

With multipoint, you can program and connect 2 different stations to the same port for 24 stations on one card.

terminal        pair         amphenol (male)
pin no.         color        pin no.
  1             w-bl            26
  2             bl-w             1
  3             w-or            27
  4             or-w             2
  5             w-gr            28
  6             gr-w             3
  7             w-br            29
  8             br-w             4
  9             w-s             30
 10             s-w              5
 11             r-bl            31
 12             bl-r             6
 13             r-or            32
 14             or-r             7
 15             r-gr            33
 16             gr-r             8
 17             r-br            34
 18             br-r             9
 19             r-s             35
 20             s-r             10
 21             bk-bl           36
 22             bl-bk           11
 23             bk-or           37
 24             or-bk           12

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[ARCOER]

Thanks. It looks like I punched it down right. I have error BRI PORT 1 on all 3 ports that I set up. I also have BRI DAT error 3329. I think BRI PORT 1 is the test to see if anything is hooked up to the line, not sure what the other error is. Any suggestions.

 

[mikeydidit]

Its been a while since i punched one of these down. But if I remember right on a regular USOC RJ-45 jack you punch the first pair down on the white blue and the second pair on the white green. If you are trying to connect this on a Cat 5 jack the pin outs will be a little different. Look at the wiring scheme on the back of the jack to get the right pinout.

When is the last time you helped someone, just because you were able to?

For the best response to a question, read faq690-6594

 

[Nick44]

PRI is blues/Orange. RJ45 1,2,4,5.
BRI is orange/greens RJ 45 1,2,3,6.
Can you put up a screen snap of your BRI-DAT station form?


Speak softly and carry a big switch