Pulling Stats from a T1 card.

[davidweiss]

Does anybody know a way to pull the traffic data out of a T1 going out of our PBX? We are using both TMDI and DTI/PRI cards. Option 11, running Succession 3.

I need something that shows the total usage and number of channels used during the busiest hour of the day.

 

[senk1s]

ld 2 is where u need to go to ...

 

[PERRYPJ]

only thing is traffic reports in ld 2, and it's from the trunk groups not t1 card

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

not a good way to do a single card if it's not also a route. i run a script that does a stat every 10 sec and compliles that intp a spreadsheat/chart.. looks good but i don't know of a command that will come close. can you make it a separate route?..

john poole
bellsouth business
columbia,sc

 

[davidweiss]

The card is also it's own seperate route.

 

[johnpoole]

then go to ld 2 and do a trf study against the route..

john poole
bellsouth business
columbia,sc

 

[davidweiss]

Is "trf study" the command I need to type in? I don't see any documention about this command in LD 2 or the Traffic Measurement NTP.

What I am looking for is a report that shows all 24 ports with a time period of 24 hours, and peg counts as to when a call is placed on those ports.

Thanks,

dave

 

[johnpoole]

schc sd sm ed em
sh eh so
d d

reportrs are a little tougher
sd start date
start month
ed end day
em end month
sh start hour
eh end hout
s0 report option

1=hour
3= half hour
d = day of week 1=sunday


john poole
bellsouth business
columbia,sc