asmforever
Programmer
I purchased a pix 515e to replace the Linux firewall in
our Web Hosting Center. We use public IP's on all of our
servers. We have a /25 IP block and a 3640 router, currently
all data is from the router ip x.x.x.1 to the linux firewall ip x.x.x.2, then to our servers ip x.x.x.6 - x.x.x.48. How do I configure the pix to use public ip's on both sides. We only want to use the pix to prevent access to unwanted ports and ip's. This is my first experience with the pix and any help would be greatly appreciated.
our Web Hosting Center. We use public IP's on all of our
servers. We have a /25 IP block and a 3640 router, currently
all data is from the router ip x.x.x.1 to the linux firewall ip x.x.x.2, then to our servers ip x.x.x.6 - x.x.x.48. How do I configure the pix to use public ip's on both sides. We only want to use the pix to prevent access to unwanted ports and ip's. This is my first experience with the pix and any help would be greatly appreciated.