Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PSTN Access Via DPNSS
- Thread starter truckola
- Start date
Supernova99
Technical User
PSTN access via DPNSS is mostly used on trunking gateways to allow pass thru or breakout there is some extra signalling which it sends out to the PSTN in the call setup
Share what you know - Learn what you don't
Share what you know - Learn what you don't
- Thread starter
- #4
I know what DPNSS does but when I set up the trunking for SIP trunks the directions say to set this in the route type. I have tried it both ways and it doesn't seem to change anything. So is it just a label in this case or does it make changes to the call?
Supernova99
Technical User
The SIP interop docs are very concise as the aim is to ensure compatability with other vendors.
Personally if the instructions are telling to you to set options then I would to avoid any problems later.
You might not ave tested your system with all the possible scenarios the interop testers would have checked.
Share what you know - Learn what you don't
Personally if the instructions are telling to you to set options then I would to avoid any problems later.
You might not ave tested your system with all the possible scenarios the interop testers would have checked.
Share what you know - Learn what you don't
- Status
Similar threads
- Locked
- Question
- Locked
- Question