I'm in the beginning stage of a large system conversion. I'm going from a definity R9 to a CM 6.2. The extensions on the definity are 4 digits and the CM is using 10 digit extensions. I know it's easy to convert the extensions on the station form but is there an easy way to convert the bridged appearance buttons, pickup groups and coverage paths to reflect the new extensions? The system has over 4000 extensions with almost 300 pickup groups and 500 coverage paths. There are 3 different DID ranges and the existing Non-DID extensions are getting new 10 digit numbers. So far we are planning to reprogram each phone live in the new system. I've been able to use provision for some tasks but hoping to use it for the whole conversion as I normally would. Will the old extension / new extension fields on the station-detail form do what I'm looking for?
Thanks for the help,
Bill
Thanks for the help,
Bill