bluemilkyway1982
Technical User
Any one knows how to check which protocols(QSIG for example) are being used on an Option 11 C.
I'm look forward to hearing from you all!
I'm look forward to hearing from you all!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Protocols
- Thread starter bluemilkyway1982
- Start date
- Status
- Thread starter
- #3
bluemilkyway1982
Technical User
Thanks GHTROUT for your information!
And I want to ask more:
How to configure QSIG protocol for trunk route on an Option 11 C ? And if I already have ISDN ISL protocol for trunk route, how to switch from ISDN protocol to QSIG.
Thanks and regards,
Ngoc
And I want to ask more:
How to configure QSIG protocol for trunk route on an Option 11 C ? And if I already have ISDN ISL protocol for trunk route, how to switch from ISDN protocol to QSIG.
Thanks and regards,
Ngoc
take it out and change IFC to ISGF, then put the trunks back in. there is no change in the cequ just the route trunks and d... out the trunks (ld 14) out the route (16) and out the d (17) put them back in
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
- Locked
- Question