Prologix with Audix TN568 - How to access Audix command line

[config5623]

Once logged into Prologix, how do you access Audix screen?

Thanks

 

[ideal]

You do not connect to the Audix from the prologix. There should be a seperate spider cable attached to the back of the system adjacent to the slot were the Audix is located.

 

[AvayaTier3]

On a 715 terminal used for Definity and Audix

Control Enter toggles between P1 and P2 returns login for:
P1 switch
P2 audix


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[config5623]

Thanks for the feedback, I was thinking about on the way home and realized control/enter could only be used when connected by terminal. I'm installing a modem on the B-25 pin connector today. Thanks again

 

[AvayaTier3]

You can have Terminal and modem access to both.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[config5623]

Thanks, the customer doesn't want to purchase a 715 monitor so all my work will be INADS. Thanks team for all your help.