PROLOGIX TRUNK QUESTION

[JDClampet]

Recently took over a site with Definity prologix and they had Digital trunks (PRI) and now I have disconnected the service and only have Analog trunk lines. How can I have the customer now dial out on those lines and remove the digital trunk group.

Thanks

 

[4merAvaya]

First, do 'list route-pattern trunk-group x' where 'x' is the trunk group number that contains the PRI circuit. Then change all of the route patterns listed and replace the PRI TG number with the analog TG number. You may have to make test calls to find out if the Prefix mark needs to be changed.

Kevin

 

[JDClampet]

Thanks Kevin,
Ya I would like them to dial 9 to get out.

 

[JDClampet]

So, I should put all my analog lines in a trunk group and point my route to that right?

thanks