If I disable the onboard video and try to add a pci video card, it doesn't matter what slot I put it in, it disables the Smart2SL RAID controller - never even shows the SCSI BIOS on power on boot - and therefore, no drives. Any ideas what's going on here?
Well, there is no interrupt set for the video card, so that's not it. Would seem strange if the SCSI card and video used the same address space. I'll keep poking around.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.