Programming the Mitel 470 2

[L0u1s]

Please help.....How do you program the Mitel 400/470 to make outgoing calls via analog trunks?
Is there a programming guide for this anywhere online?

 

[sarond]

Manual is found on Mitel's website.

https://www.mitel.com/document-cent...ffice-400/63/en/system-functions-and-features

Look under the outgoing traffic section.

 

[L0u1s]

Thanks, link gave a lot of info but I am still having problems programming this system to make outgoing calls.
Can someone please guide.......all of our numbers here start with a 5, numbers on island is 7 digits long, overseas dialing starts with a 1 (US calls) and 0 and 011 for international calls.

Thanks in advance,

 

[voipneerd]

Hi

First, you need to go to ( numbering plan) to define the exchange Access number for ex. 9
then trunk group, creat new trunk group and select the, required analogue lines
Under, route assinge the trunk group for route number

and that assigned it under each user in (settings---Route)

Hope that can help you

 

[L0u1s]

Thank you so much....very grateful for your help.
I think that was the one thing that was missing, thank you once again.

 

[voipneerd]

Glad that I can Help
Appreciate it if you give me Star