Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

programming for 911 in Main office to SRG in normal mode

Status
Not open for further replies.

kat0118

Technical User
Feb 9, 2009
6
US
I need help I can not get a 911 call to route throug the SRG50 during normal mode.
 
Put all the IP phones for the SRG in their own zone. Once that is done build the ESA ERL zone to route using the to the SRG trunks across your virtual trunks.
The NTP for SRG has a section for ESA routing that will step you through the configuration. The NTP is NN43001-307
 
I have done that. It seems the calls are failing at the NRS.
I have checked the mapping in the sig server and NRS and all names seem to match, but call still fails.
 
Is SRG end point registered? Are the routing entries configured on the SRG endpoint?
 
Turn on DCH messaging for virtual route and post results.

If you can telnet to SigServer, also turn on H323 or SIP trace and post that also with info on what IP is What.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top