programming DECTs

[Nedjmabida]

Hello,
I introduce myself, I am an administrator access a telephone network of ten (10) MD110 systems interconnected (Q-SIG) E1
Each system has analog subscribers and Digital,.
When I started programming DECT TD292 I encountered a problem at two sites is radio link between base stations and dects is not permanent (no network field after some time)

Dect programming is as follows
CXSYI: ... ..
CXCFI: ...;
CXRFI:
GESPI: ...
Gedii: ..
CXAKI: ...

Can you help me ! please contact sbelouache@yahoo.fr

 

[fellicciano]

Is it a md110 system? Do you have base stations programmed in all of the lims?

 

[fcpli]

What do you mean by this:
"When I started programming DECT TD292 I encountered a problem at two sites is radio link between base stations and dects is not permanent (no network field after some time)". Is there a radio link between the LIMs or between the base stations and ELU31's or what?

 

[doktor]

To have a stable DECT om MD110 LIMs with ELU-31, you need to have a stable clock from the PSTN network in all LIMs, where ELU-31 has been installed.
I guess that your LIMs connected with radio links some times have loss of syncronization?
Therefore is the advice to install an ISDN2 (BRI) on TLU-79, and just get the sync from that ISDN system. No channels for calls need to be installed.
This advice have we used many times especially with MX-ONE, where the connections between LIMs is a LAN/WAN network.

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx