Programming conference Pin# in NEAX2000 IPS

[canazco]

Hi guys,
We have a conference service for our users using our NEAX2000 IPS with a 32-Party Conference Card (SPN-CFTC). We manually setup the pin codes in the "Transaction Boxes" area in the program NEAXMAIL AD-64 Administration Console.
This is really a time consuming task, so we decided to automate the process. I created a simple VB program to manage the reservations and schedule, however I have no idea how to change the pin codes now using my program. Is there a data base in the PBX that I can easily access with ODBC or any set of API's or special commands to accomplish my task? Is there any manual where to find this information?

Thanks in advance.

 

[pingram3541]

You might try monitoring the MCI link when the pin codes get setup so you can see the command set. I wish I could help more.

Another thought would be using OAI control if the CPU is equiped with a PZ-M606 ethernet connection on the network.

-Phil Ingram

http://www.tell-a-tek.com/

{All-You-Can-Eat Telecom and IT Buffet}

 

[canazco]

Thanks Pingram3541,
I like the idea. Actually, it will help me to understand a bunch of numeric instructions contained in a sample script to set the conference card that I found in Internet.

By the way, what is the MCI link? is that the serial interface in the PBX? can I use MATWorx to access it?

Thanks again.

 

[pingram3541]

Yes, the MCI link (message center interface) is the serial communications typically provided by an AP00 card, however you can use one of the ports off the processor by setting you 08 and 4X commands properly. i.e. soft-key/mwi integration from RS1 instead of built-in modem.

Hope this helps.

-Phil Ingram

http://www.tell-a-tek.com/

{All-You-Can-Eat Telecom and IT Buffet}