Programming CM 6.3 From Scratch

[Antaew]

I have a CM 6.3 that i'm programming from scratch. I have all the software and license files already loaded. Does anyone know of a link I can go to and use as a guide to make sure I don'e overlook anything?

Thanks

 

[kyle555]

You'll always overlook something. What are you trying to do with it?

Old interop docs like "how to integrate CM to X...." can do a great job of starting from an empty PBX and going screen by screen.

 

[Antaew]

The Customer is changing out a I120 for a G450 w/8700. Everything is been ing done from scratch. Where can I find the interop docs?

 

[kyle555]

There are no interop docs to convert Distributed Office to CM that I know of.

It would take a thorough analysis of how they're using DO and its features and building that into CM.

 

[dialtonebone]

Start with building out your dial plan.

 

[wpetilli]

Agree with Randy... I'd start at the dialplan so you can at least add stations and test basic functionality. You'll then need to understand what it is you are using the system for and build on from there. You can't do anything w/o working phones and making phone calls. When you get into the whole system parameters screens is where it probably gets tricky, but working with a clean slate is something we don't always get to do.

 

[Antaew]

All;
Thanks for the responses. I've built the dial plan, trunks, and stations. I'm basically looking for a check list to confirm all translations and data has been imputed before I send it out to the field.
Once again, Thanks for your responses..