Programming a Valcom 6 zone paging system on a Meridian Option 11 Switch 1

[ronshaw]

I am looking for step by step instructions and load commands necessary to program a Valcom 6 zone paging system on a Meridian Option 11 Switch.

 

[GHTROUT]

Is it a Trunk or Station interface? What type of line does the Valcom need from the PBX?

~~
Gene at GHTROUT.com

 

[ronshaw]

it is a trunk line. I have a tn that is coming from the switch. I have tried to LD 10, LD 14, and LD 16. I do not know all the steps to take on each LD commands

 

[GHTROUT]

1: Identify an Access code for paging. LD16 Program a Trunk route, TKTP=WAT, ACOD (Your code); MANO=YES. Everything else default.
2: LD14 Program a trunk. TYPE WAT, Route from above, Member 1, CLS=DTN; Everything else default.
3: Cross connect trunk to paging input

To test, dial access code, then zone number.

~~
Gene at GHTROUT.com

 

[ronshaw]

I am still having problem with each ld command, do you have a print out of each load command

 

[GHTROUT]

Tell us what problem you think you are having. Can you even log in?

~~
Gene at GHTROUT.com

 

[RickyPone]

I gave you the programming for a working 6 zone valcom in the other thread you started. If you build it exactly like that it will work.