programming a speedcall controller on a 3904 1

[altolabado]

what is the line of code to put a speed call controller on M3904 when I program it in it reads SpCallUser and I cannot make changes to the master list?

when I use it I press the SpCall button and then enter the number SCNO 01 for example and press "*" then enter the number 416-555-5555 . is this correct?

Thanks

 

[johnpoole]

if you have a list built in ld 18 then key x scc yy. i just put one on my 3904 in the switchroom, press the key, enter entry no. the number to store. what size did you make your list. mine is 10 so it takes a 1 digit no. i did not have to change any class mark..

john poole
bellsouth business
columbia,sc

 

[altolabado]

does bot work on a systwem speed call list..... I would like to administer the system speed call list and when I put myself as a controller and I try to reprogram the #'s it automatically just bypasses it and gives me adial tone??

 

[coniglio]

why don't you send a print of the phone that you assigned as the system speed call controller and a copy of the list as well

 

[coniglio]

by the way, a system speed controller is programmed as an SSC key. An SCC key is a regular speed call list.

 

[altolabado]

SSC ?
What should the line read

key 04 SSC 0001 ?
that does not work!

 

[Nortellian]

Obtain the manuals as computer files and that way they are very easy to search.

 

[coniglio]

if you have created a system speed call list the key is programmed as SSC (system speed controller) if you have programmed a regular speed call list the key is programmed as SCC(speed call controller). which did you build it as?

 

[johnpoole]

These are the only two entrys i put on my 3904 and it works, added a scu to a 2616 and it works with no cls change.

03 TRC
04 SCC 0021

TYPE: scl
LSNO 29
SIZE 10
RNGE

SCNO 0029
SCL

DNSZ 16
STOR 0
STOR 1 97421047
STOR 2 4114
STOR 3
STOR 4 125
STOR 5
STOR 6
STOR 7
STOR 8
STOR 9




john poole
bellsouth business
columbia,sc