Programming a key and disabling mailbox

[joatsaint]

I am a newbie to the Meridian system and volunteered to be the phone admin. We don't have any manuals that I can refer to for help, so I hope you guys don't mind answering questions in detail a newbie can handle. I have tried searching the forum for answers, but they don't have the kind of detail I need to understand what is being stated.

I need to program a second phone number on a 3903. Key 0 is programmed and I need to program Key 1.

The second thing is to delet a mailbox or disable it so calls do not hear it. And have the phone roll to another number if no one picks up.

Thanks for your help.

 

[EddieDuece]

Here a set out of my switch;

DES TREAS2
TN 036 0 08 02
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN 3353
TGAR 2
LDN NO
NCOS 2
SGRP 0
RNPG 4
SCI 0
SSU
LNRS 16
XLST
SCPW 1234
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLD CRPD STSA
MWA LMPX RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDD CFXD ARHA FITD CNTD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
AHA DDGA NAMA
DRDD EXR0
USRA ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN

CPND_LANG ENG
RCO 0
HUNT 3353
LHK 4
LPK 7
PLEV 02
SPID NONE
AST
IAPG 0
AACS NO
ITNA NO
DGRP
PRI 01
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 7701 0 MARP
CPND
NAME Maureen Cook
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 7702 D MARP
CPND
NAME Maureen Cook
XPLN 27
DISPLAY_FMT FIRST,LAST

02
03
04 ADL
05 ADL
06 ADL
07 DIG 2 40 R
08 ADL 12
09 ADL 12
10 ADL 12
11 XMWK 3353 7700
12
13
14
15
16 MWK 3353
17 TRN
18 AO6
19 CFW 4 5143
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31

 

[EddieDuece]

What do you need on key 1? To make the phone hunt to another number, change the FDN and HUNT prompt to the desired numer like so;

>ld 20

PT0000
REQ: chg
TYPE: 3904
TN 36 0 6 6
ECHG yes
ITEM fdn 2980
ITEM hunt 2980
ITEM
HNT FNA

 

[joatsaint]

I meant to say that Key 0 is programmed with a phone # and that I needed to program Key 1 with a different phone #.

 

[EddieDuece]

So do this;

ld 20

PT0000
REQ: chg
TYPE: 3904
TN 36 0 6 6
ECHG yes
ITEM Key 1 scr 1111
ITEM
HNT FNA

 

[jamie2]

If this isn't an ACD phone, then you can do an easy change.

REQ: chg
TYPE: 3904 (Set type)
TN x x x X
ECHG yes
ITEM key 1 scr xxxx d (xxxx= your 2nd DN).


For your second questions, remove the FNA and HTD in the CLS of the phone and give your HUNT prompt 000.

 

[joatsaint]

Thanks for the information.

 

[acewarlock]

joatsaint: This might help you out with commands.

You'll find the manuals here.

http://www.intechigentsia.com/online/index.htm

 

[johnpoole]

another tip- hunt is controled by cls hta (hunt allow) that is the target for a busy station


fdn (forward to number) is controled by cls fna and a timer called rco.. that is the target for ring no answer..

when you want a phone to roll, toss it down a hill.. in this system you have hunt and forward.. sometimes it helps to understand nortels term's.. now your certified, have a great weekend

john poole
bellsouth business
columbia,sc

 

[joatsaint]

Thanks for all the help and the links. Everything is working as they want it now.