Programming a Feature Key such as "Do Not Disturb" or "Call Forward Always" on a

[dannytaylor]

Can we program a Feature Key such as "Do Not Disturb" or "Call Forward Always" directly on a 4015? I know it's possible with a 4025 but I did not find a way with a 4015. Also, the manual mentions something like this which is not working either:

To Program a feature Key:
1. Dial 47.
2. Press an unused personal key.
3. Dial the feature code for the desired ffeature key.
4. Press CANCEL.

I usually set keys using the key assignment from the MAC editor.

Thanks for your help.

 

[Supernova99]

Yes you can
Create a personal speedcall and use the Feature access code for either DND or CFA then save it

Share what you know - Learn what you don't

 

[dannytaylor]

Will this act like a key assignement? For example, can I set a key to toggle between "Do Not Disturb" ON/OFF states and key it lit when turned ON?

Also, I can't find the "Call Forwarding Always" in the Feature access code assignment list.

 

[Supernova99]

OK
Call forwarding is just an on/off key
You will need program the call forward always number via the call forwarding menu (you will see a * next to the number when it is active)
The DND key is probably best programmed via the system as a DND key as this will then act like a toggle on/off
If you have lots to do this is the best way as you can use the feature 'copy keys' and this will program multiple phones


Share what you know - Learn what you don't

 

[LoopyLou]

Might depend on what system you are talking about. You can program more directly on a phone on an SX200 then a 3300.

The beatings will continue until morale improves.