Hello!
Recently, due to corporate restructuring and facility closures, one of our buildings on this campus was isolated from us (data, phone, etc) and put on their own service.
As such, they do not receive telephone service from our Definity any longer, instead having direct lines from the telco.
As such, to call from the building next door, we now have to dial the full number (9, area code, number)
That building has approximately 40 phones in it, all with the last four digits being 49xx.
My Definity has no 4xxx extensions or stations configured/programmed for it.
What I'd like to do is setup a series of 4-digit speed-dials with the 49xx prefix to dial these people up without having to dial the full number.
I know it can be done, because several speed dials exist with a 70XX number - unfortunately, I was handed the Definity with little to no training, and the most I can do is setup new stations, config programmable buttons, that kind of thing.
I don't know how to display the configuration of the existing 70xx speed-dials to look at for reference, even.
Any help that can be provided would be most appreciated.
Recently, due to corporate restructuring and facility closures, one of our buildings on this campus was isolated from us (data, phone, etc) and put on their own service.
As such, they do not receive telephone service from our Definity any longer, instead having direct lines from the telco.
As such, to call from the building next door, we now have to dial the full number (9, area code, number)
That building has approximately 40 phones in it, all with the last four digits being 49xx.
My Definity has no 4xxx extensions or stations configured/programmed for it.
What I'd like to do is setup a series of 4-digit speed-dials with the 49xx prefix to dial these people up without having to dial the full number.
I know it can be done, because several speed dials exist with a 70XX number - unfortunately, I was handed the Definity with little to no training, and the most I can do is setup new stations, config programmable buttons, that kind of thing.
I don't know how to display the configuration of the existing 70xx speed-dials to look at for reference, even.
Any help that can be provided would be most appreciated.