Programming 34D Phone 1

[Mars0116]

I have Avaya Partner Release 7.0 and have 34D button phones. Can someone tell me what the programming steps are for the following:

Voicemail Transfer
Voicemail Access
Simultaneous Page
Paging Group *71
Do not disturb
Music

For example "Forward" is Feature 11...this is what I need for the above.

I appreciate everyones help.

 

[exsmogger]

Check out the quick reference guides on my website. I haven't written one for the R7 yet, but the feature codes are the same for all releases.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[Mars0116]

Brian,

I have 14 phones that will have the same layout, do I program each phone or do I do it from either extension 10 or 11?

thanks

 

[exsmogger]

You can program feature buttons either way. You can go to each individual phone and dial F00 to enter programming mode, or go into Centralized Programming from either station 10 or 11 and program each station's buttons.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[Mars0116]

Thanks a bunch Brian!

One last question, how do I program a button to be Blank and I can't seem to find the programming function to VM ACCESS. I want to program a button that would dial Intercom 777 to access vm.

Thanks again.

 

[exsmogger]

For a voicemail access button go into programming, press the button to be programmed, press the left intercom button and dial 777.



Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[Mars0116]

How about programming a button to be blank.

 

[TouchToneTommy]

Press the button, then press Mic/HFAI

 

[SYQUEST]

You can also get all the documentation for free from support.avaya.com.

....JIM....