Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Programing DID to ring to ext.

Status
Not open for further replies.

desertinn

Vendor
Nov 28, 2010
324
US
I have a customer that has 20 unused DID's that all seem to ring to the reception but only when the NIGHT service is activated. During the day the calls just ring and no answer.

I am trying to figure out the procedure to make for example 555-XXXX ring at extension 3237 only and all the time.
 
in order for a did to ring at a phone you must program the target lines public recieved digits,,,,,did 555-1212,,,telco sends 4 digits,,,go to lines target lines,,,choose an unassigned target line,,say 241,,,,find the field for public recieved digits,,,enter 1212,,,go to assigned DN's,,,enter 3237.
 
And if it's ringing in night service you need to set the main # in a different ring group so the other lines wont be in the night mode.
 
Yes Hook Flash. So it sounds like I would treat this like I would if the POTS line did not have the Centrex transfer feature available?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top