Programing 011 and 411 Barring on a PRI

[redcarpetmovers]

I tried to consult the HELP files for directions on the best way to block any calls for 011, 411 10 etc to block any toll abuse for all outgoing calls on the PRI.

Do I set p the programing in the ARS if so how do I program that or mst this be done on a per Hunt Group or per Set basis. Is there an example for programing these restrictions?

Thankyou

 

[NLPeterK]

Depends who you want to block it for, everyone or just a few users.

System wide would be in the system short codes.

 

[redcarpetmovers]

Everyone no calls othern than loca, toll free and US national are allowed to be made on this PRI

 

[NLPeterK]

Then just set up the Barred short codes in system short codes...

 

[AACon]

Change the feature on the 0 code in ARS to barred.
Create a new code of 411 and set it to barred as well. easy easy.

-Austin
ACE: Implement IP Office

 

[redcarpetmovers]

Just did it and it worked just like you said, Eazy Peazy! I also blocked, 011 & 10