Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ProCurve 9308 & 8000M

Status
Not open for further replies.

GHeinonen

IS-IT--Management
Feb 7, 2001
26
0
0
US
We've got a ProCurve 9308 and ProCurve 8000M and we're looking for other ProCurve users here on Tek-Tips to swap questions and answers. ...............................
Thanks, Gary
 
Hello,

we just opened a site with a 9308 and 14 4000Ms. Don't have much info on them yet but will soon.
 
We have a 6308m and quite a few 4000.
What are you using for a routing protocol?
 
We have a 6308m and about 20 x 4000. Do you have any issues?
 
Ya, the 9308 and 8000M will not trunk over gigabit fiber. I had the management blade on the 9308 setup for 2 fiber pipes to the 8000 and tied them together with a trunk. Within a few moments all traffic will stop on the LAN and you will see a few broadcasts and thats about it. In fact, the fiber port eventually stopped working with predictability all together and so now I am stuck using 100 megabit to tie those segments together. You'd think the fiber port would have completely failed, but it hasn't. I did lose a 10/100 blade inside the 9308 in the spring of this year, it just gave up the ghost. ...............................
Thanks, Gary
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top