ProComm Plus 4.1 Aspect script to monitor for "RLS RED ALRM", then send me an email

[phoneguy8]

Hello,
We are monitoring our Option 11C TTY 1 on a PC running ProComm 4.1.
I'm not a programmer, and I was wondering if someone has a ProComm 4.1 Aspect script to monitor the TTY for "RLS RED ALRM", notify my email address in Gmail or Outlook Express when we get a T1 Red Alarm, then continue to monitor for "RLS RED ALRM"?
We had a T1 failure on Saturday morning, and didn't know until 8AM Monday. It would have been less stressful to have time over the weekend to troubleshoot before everyone showed up on Monday.
Any suggestions are appreciated, even if you think I should use a different communications software package.
Thank you,
John

 

[Firebird Scrambler]

I'm not sure if Procomm is designed to do what you require. Could OTM/TM etc be programmed instead?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[phoneguy8]

I do have an old copy of OTM.
Do I need a license? If so, I'd like to save the $ and use ProComm Aspect, if possible.
Thank you,
John

 

[GHTROUT]

I think you could run a batch file, and have BLAT send the email. Google "BLAT"

Find more at GHTROUT.com