Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
processor at 100% on a BCM 4.0
- Thread starter tech136
- Start date
BCMAdminMTT
Technical User
Hi, here is some litterature I found related to software release BCM.R400.SU.System.013-200808. Maybe this information can be helpfull. If not, just disregard.
Some of the patches included in this release are intended to solve the following issues (This is not a complete description of software release BCM.R400.SU.System.013-200808)
Software Update BCM.R400.159-VOICEMAIL Description:
---------------------------------------------------
- High CPU spikes
If a Desktop Messaging client is configured for Auto Send/Receive, and a new fax or voice message is delivered to that client's mailbox, resulting in more than 500 messages in that mailbox, CPU usage spikes to 100%. This update will resolve the problem. Q01762747
Software Update BCM.R400-078-CTE Description:
---------------------------------------------
- CTE Crashes on target line calls with 10 digits.
On systems configured with Target Line DN's greater than 7 digits CTE can crash.
These additional symptoms will also occur.
- The CPU shows 100% use and is affecting IP sets and AA. It lasts about 10 mins then everything works again.
- IP sets - cutting in and out, long delays.
- AA - voice is scratchy
- Line monitor doesn't work on this BCM from any PC but does work on other BCM's. Q01420757
Some of the patches included in this release are intended to solve the following issues (This is not a complete description of software release BCM.R400.SU.System.013-200808)
Software Update BCM.R400.159-VOICEMAIL Description:
---------------------------------------------------
- High CPU spikes
If a Desktop Messaging client is configured for Auto Send/Receive, and a new fax or voice message is delivered to that client's mailbox, resulting in more than 500 messages in that mailbox, CPU usage spikes to 100%. This update will resolve the problem. Q01762747
Software Update BCM.R400-078-CTE Description:
---------------------------------------------
- CTE Crashes on target line calls with 10 digits.
On systems configured with Target Line DN's greater than 7 digits CTE can crash.
These additional symptoms will also occur.
- The CPU shows 100% use and is affecting IP sets and AA. It lasts about 10 mins then everything works again.
- IP sets - cutting in and out, long delays.
- AA - voice is scratchy
- Line monitor doesn't work on this BCM from any PC but does work on other BCM's. Q01420757
- Status
Similar threads
- Question