Probs with NS700

[jensgebken]

hello - have an old NS700 without BRI2 - my problem is now that i want to connect the system with my fritzbox 7490 so that i can make calls - have O2 as a provider - can you help me how i have to configure the system - dsp is active 4 channels

Link
Link

i have the prob - in that case where i click on configuration slot that you can see in the attached link that i do not have "site property" - so that i can change the ports

what must i change in the fritzbox

 

[CMUK]

Fritzbox must have ports 5060 open to PBX IP Address, ports 16000-16511 to DSP Card IP Address
Lock down to the address provided by o2

Calum M
ACSS

 

[jensgebken]

i have the prob - in that case where i click on configuration slot that you can see in the attached link that i do not have "site property" - so that i can change the ports

 

[jensgebken]

Hi - okay - i found the configuration fpr the udp and change it like the dokumentation

can you explain me this
Fritzbox must have ports 5060 open to PBX IP Address, ports 16000-16511 to DSP Card IP Address

 

[CMUK]

5060 for signalling to PBX for SIP Trunks
16000-16511 for media (speech)

Calum M
ACSS

 

[jensgebken]

May you can Send me an Screenshot of the settings in FRITZ!Box

 

[CMUK]

Sorry I have not got access to a Fritz!box,
Search google on how to open ports on the device.

Calum M
ACSS