I'm unable to connect to my company network with company issued Nortel VPN client (V04_65.09) through my Linksys BEFW11S4 wireless router (firmware 1.43.3z ETSI, Nov 27 2002).
The VPN works fine if I use a direct cable connection to my cable modem (i.e. don't use the router at all).
Looking at the client VPN log file it looks to have authenticated and connected OK, then 'checks for banner text' and drops the connection.
I've been trawling through the forums here and have seen lots of suggestions for tweaking various options on the router. I've pretty much tried all sorts of combinations and have wasted a lot of time on this.
I orginally had a d-link 614+ that wouldn't work, so I swapped it for the Linksys when I heard that people had got this to work ok.
So, if anyone out there has managed to get this router working with a VPN (Nortel or otherwise), please could you let me know what options you have configured on the router to get it work.
Many thanks....
The VPN works fine if I use a direct cable connection to my cable modem (i.e. don't use the router at all).
Looking at the client VPN log file it looks to have authenticated and connected OK, then 'checks for banner text' and drops the connection.
I've been trawling through the forums here and have seen lots of suggestions for tweaking various options on the router. I've pretty much tried all sorts of combinations and have wasted a lot of time on this.
I orginally had a d-link 614+ that wouldn't work, so I swapped it for the Linksys when I heard that people had got this to work ok.
So, if anyone out there has managed to get this router working with a VPN (Nortel or otherwise), please could you let me know what options you have configured on the router to get it work.
Many thanks....