Hi all,
I have a problem with an installation we made on a costumer and we are unable to make it work correctly. The costumer have a S8700 installed, and we just added Intuity to the system. Till that point all is correct, ip conectivity between the CLAN and Intuity is ok (we conected em thru a crossover cable), and even when we plug a analog phone to the analog line circuit pack where the 4 extensions of Intuity are conected, and call the Audix huntgroup, we can collect messages and all works great.
The problem comes when we try to collect messages from an IP-Phone in the system, the Audix extension wont recognize the DTMF tones from the IP-Phone. We tried all the options you have in the system-parameters ip-options screen where u select in-band, in-band G711, out of band, rtp... and no matter which option we select, is imposible for us to make it work from a IP-Phone. We using 4610 phones and i checked avaya firmwares for this model and they dont solve this matter (afaik)...
We solve the problem when we add a new incoming route in the incoming call handling screen in a trunk... the call is routed to the Audix huntgroup and when we call from a IP-Phone to the external number (goes out thru a DS1) it will be able to collect messages and Audix will recieve correctly those DTMF tones.
Can anyone give me any hint about this becuase we tried all... and im out of ideas...
Thx in advance
I have a problem with an installation we made on a costumer and we are unable to make it work correctly. The costumer have a S8700 installed, and we just added Intuity to the system. Till that point all is correct, ip conectivity between the CLAN and Intuity is ok (we conected em thru a crossover cable), and even when we plug a analog phone to the analog line circuit pack where the 4 extensions of Intuity are conected, and call the Audix huntgroup, we can collect messages and all works great.
The problem comes when we try to collect messages from an IP-Phone in the system, the Audix extension wont recognize the DTMF tones from the IP-Phone. We tried all the options you have in the system-parameters ip-options screen where u select in-band, in-band G711, out of band, rtp... and no matter which option we select, is imposible for us to make it work from a IP-Phone. We using 4610 phones and i checked avaya firmwares for this model and they dont solve this matter (afaik)...
We solve the problem when we add a new incoming route in the incoming call handling screen in a trunk... the call is routed to the Audix huntgroup and when we call from a IP-Phone to the external number (goes out thru a DS1) it will be able to collect messages and Audix will recieve correctly those DTMF tones.
Can anyone give me any hint about this becuase we tried all... and im out of ideas...
Thx in advance