Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problems in Features in Digital Sets

Status
Not open for further replies.

SaeedAyman

Technical User
Aug 28, 2012
99
EG
Well, for a HiCom 350, a new problem suddenly appeared.
Features like FWD, alarm, etc. have stopped working from the codes on the set, meaning that the feature can be used but only using the programming of ComWin, but when trying to do it using the codes (*48, *55, etc.), it gives not possible.
Also, the features can be disabled from the codes, for example I cannot program FWD from code (*48), but when I program it using the ComWin, I can disable it using the opposite code (#48)!!!!
Today, I discovered that this problem only occurs when involving digital sets, meaning that iI can use the FWD from analog set to another analog set. But when I involve digital sets (from and to), it gives this problem!!!
 
If this has worked previously then something has changed on the setup.
If it has never worked then you need to ensure that ALL the WABE codes are entered.
Normally when setting up a new system you would add in each and every WABE code possible using a non used range for example **1001 to **1999
Open Comwin and do macro/retrieve system variant first, then ADD-WABE and CTRL/TAB for ComWin Edit
After that add in all the codes so as phones can use them.

Next to check is FEASU to ensure that features are enabled.
Maybe you have an old REGEN from the system that you can check.

Then the COS for each phone is important.
You should have COS's setup for each type of phone,
If it can forward external, forward internal etc.

Failing all of that you probably need to do a restart/reload
 
Unfortunately, I already did all of that!!
And yes, it was working before :(
The WABE is perfect
The FEASU is perfect
Tried the Retrieve system variant
Really I do not know what happened!!
 
Can you DIS-CODEW;
Not sure if that is the cause but give it a try
 
This is the CODEW



+-----------------------------------------------------+-------+-------+-------+
| | | | |
| UNIT | CON- | USED | FREE |
| | TRACT | | |
+-----------------------------------------------------+-------+-------+-------+
| OPERATING SOFTWARE V3.0 PLUS | 1064 | 505 | 559 |
| TELEPHONY PLUS | 792 | 465 | 327 |
| KEY 300 | 120 | 9 | 111 |
| TRUNK / NETWORKING | 270 | 40 | 230 |
| ATM NETWORKING 1.0 | 0 | 0 | 0 |
| ATM NETWORKING 2.0 | 0 | 0 | 0 |
| ATM INTERWORKING 1.0 | 0 | 0 | 0 |
| CORDLESS E | 0 | 0 | 0 |
| TRADING E | 0 | 0 | 0 |
| MULTIRATE SWITCHING | 0 | 0 | 0 |
| PNE | 0 | 0 | 0 |
| VOICE COMPRESSION | 0 | 0 | 0 |
| FLEXROUTING SUPERVISOR | 0 | 0 | 0 |
| FLEXROUTING AGENT | 0 | 0 | 0 |
| TELEWORKING | 0 | 0 | 0 |
| OCTOPHONE PERMITTED | NO | | |
| TRUNK / NETWORKING ENHANCED | NO | NO | |
| ACL CONNNECTION FOR SIEMENS VOICE APPLICATIONS | NO | | |
| HICOM CORDLESS ES | NO | | |
| LAWFUL INTERCEPTION | NO | | |
| CDR-E PERMITTED | NO | NO | |
+-----------------------------------------------------+-------+-------+-------+
 
Does not look like a CODEW problem.

Can you DIS-SBCSU and paste here ?

Also DIS-BERUM:ALLSTN;

 
Here they are



DISPLAY-SBCSU:STNO=6810;
H500: AMO SBCSU STARTED

------------------------------- USER DATA -----------------------------------
STNO =6810 OPT =OPTI COS1 =9 DPLN =0 SPDI =Y
MAINO =6810 CONN =DIR COS2 =9 ITR =0 SPDC1 =0
PEN = 1- 1- 97- 4 LCOSV1 =32 COSX =1 SPDC2 =1
INS =Y STD =25 LCOSV2 =32 SERVID =0 CBKBMAX=5
SECR =N LCOSD1 =11 DSSTNA =N RCBKB =N
SSTNO =N DIGNODIS=N LCOSD2 =10 DSSTNB =Y RCBKNA =N
TRACE =N HFREE = ASYNCT =500 PERMACT= CBKNAMB=Y
ALARMNO =0 HMUSIC =0 API : TEXTSEL=ENGLISH
EXTBUS = REP =0 OPTICOM=N OPTISPA:0 DLAUT =
CALLOG =ALL IDCR =N OPTICA =0 OPTIS0A:0 DLMAN =
HEADSET =N OPTIDA =0 OPTIABA:0 PRIO =
HSKEY =NORMAL ATMADDR= VPI =
DFSVCANA= TFAGRP = PATTERN= VCI =
DVCFIG =OPTISET TSI =1 SOPTIDX= SPROT =
DOPTIDX= DPROT =
FOPTIDX= FPROT =
TOPTIDX= TPROT =
VOPTIDX= VPROT =
------------------- ACTIVATION IDENTIFIERS FOR FEATURES ---------------------
FWDS :N FWDT :N FWDV :N FWDF :N FWDD :N
HTOS :N HTOT :N HTOV :N HTOF :N HTOD :N
DND :N VCP :Y CWT :N TWLOGIN:N
--------------------- FEATURES AND GROUP MEMBERSHIPS ------------------------
ESSTN :
PUGR : HUNTING GROUP : N
KEYSYS :Y NIGHT OPTION : N ASSOCIATED STN : N
--------------------- SUBSCRIBER ATTRIBUTES (AMO SDAT) ----------------------
NONE
-----------------------------------------------------------------------------

AMO-SBCSU-111 STATION AND S0-BUS CONFIGURATION OF SWITCHING UNIT
DISPLAY COMPLETED;


<DISPLAY-BERUM:TYPE=ALLSTN;
DISPLAY-BERUM:TYPE=ALLSTN;
H500: AMO BERUM STARTED
+===========================================================================+
| CLASS OF SERVICE SWITCHOVER FOR S T A T I O N S |
+===========================================================================+
| CA : COS POINTER ( =1 : COS1 IS ACTIVE, =2 : COS2 IS ACTIVE ) |
| CD=A : STATION WITH KEY-LOCK (KEYSTN) - NO SWITCHOVER |
+------------------+------------------+------------------+------------------+
| C C | C C | C C | C C |
| STNO COS A D | STNO COS A D | STNO COS A D | STNO COS A D |
+------------------+------------------+------------------+------------------+
| 221 16 1 | 222 14 1 | 6000 9 1 | 6001 9 1 |
| 6002 9 1 | 6003 9 1 | 6004 9 1 | 6005 9 1 |
| 6006 9 1 | 6007 9 1 | 6008 9 1 | 6009 9 1 |
| 6010 9 1 | 6011 9 1 | 6012 9 1 | 6013 9 1 |
| 6014 9 1 | 6015 9 1 | 6021 9 1 | 6022 9 1 |
| 6023 9 1 | 6024 9 1 | 6031 9 1 | 6032 9 1 |
| 6033 9 1 | 6034 9 1 | 6037 9 1 | 6040 9 1 |
| 6041 9 1 | 6042 9 1 | 6043 9 1 | 6044 9 1 |
| 6050 11 1 | 6051 9 1 | 6052 9 1 | 6053 9 1 |
| 6054 9 1 | 6058 9 1 | 6061 9 1 | 6062 9 1 |
| 6063 9 1 | 6064 9 1 | 6066 9 1 | 6067 9 1 |
| 6070 9 1 | 6071 9 1 | 6072 9 1 | 6073 9 1 |
| 6074 9 1 | 6076 9 1 | 6077 9 1 | 6080 9 1 |
| 6081 9 1 | 6083 9 1 | 6089 9 1 | 6090 9 1 |
| 6091 9 1 | 6092 9 1 | 6093 9 1 | 6094 9 1 |
| 6095 9 1 | 6100 9 1 | 6101 9 1 | 6102 9 1 |
| 6103 9 1 | 6104 9 1 | 6105 9 1 | 6109 9 1 |
| 6110 9 1 | 6112 9 1 | 6119 9 1 | 6120 9 1 |
| 6121 9 1 | 6122 9 1 | 6123 9 1 | 6130 9 1 |
| 6131 9 1 | 6132 9 1 | 6135 9 1 | 6136 9 1 |
| 6140 9 1 | 6142 9 1 | 6144 9 1 | 6150 9 1 |
| 6151 9 1 | 6152 9 1 | 6153 9 1 | 6154 9 1 |
| 6160 50 1 | 6161 50 1 | 6170 9 1 | 6171 9 1 |
| 6172 9 1 | 6173 9 1 | 6174 9 1 | 6175 9 1 |
| 6180 9 1 | 6181 9 1 | 6182 9 1 | 6183 9 1 |
| 6184 9 1 | 6185 19 1 | 6186 9 1 | 6187 9 1 |
| 6188 9 1 | 6189 9 1 | 6190 9 1 | 6191 9 1 |
| 6192 9 1 | 6193 9 1 | 6194 9 1 | 6195 9 1 |
| 6199 9 1 | 6200 9 1 | 6201 9 1 | 6202 9 1 |
| 6203 9 1 | 6204 9 1 | 6210 9 1 | 6211 9 1 |
| 6212 9 1 | 6213 9 1 | 6214 9 1 | 6220 9 1 |
| 6224 9 1 | 6230 9 1 | 6231 9 1 | 6232 9 1 |
| 6233 9 1 | 6234 9 1 | 6240 9 1 | 6241 9 1 |
| 6242 9 1 | 6243 9 1 | 6244 9 1 | 6250 9 1 |
| 6251 9 1 | 6252 9 1 | 6253 9 1 | 6254 9 1 |
| 6255 9 1 | 6260 9 1 | 6261 9 1 | 6262 9 1 |
| 6263 9 1 | 6264 9 1 | 6266 9 1 | 6267 9 1 |
| 6268 9 1 | 6270 9 1 | 6271 9 1 | 6272 9 1 |
| 6273 9 1 | 6274 9 1 | 6280 9 1 | 6281 9 1 |
| 6282 9 1 | 6283 10 1 | 6284 9 1 | 6288 9 1 |
| 6290 9 1 | 6291 9 1 | 6292 9 1 | 6293 9 1 |
| 6294 9 1 | 6297 9 1 | 6300 9 1 | 6301 9 1 |
| 6302 9 1 | 6303 9 1 | 6304 9 1 | 6310 9 1 |
| 6312 9 1 | 6313 9 1 | 6314 9 1 | 6321 9 1 |
| 6322 9 1 | 6323 9 1 | 6324 9 1 | 6330 9 1 |
| 6331 9 1 | 6332 9 1 | 6333 9 1 | 6335 9 1 |
| 6336 9 1 | 6337 9 1 | 6338 9 1 | 6339 9 1 |
| 6340 9 1 | 6341 9 1 | 6342 9 1 | 6343 9 1 |
| 6344 9 1 | 6345 9 1 | 6350 9 1 | 6351 9 1 |
| 6353 9 1 | 6360 9 1 | 6361 9 1 | 6362 9 1 |
| 6363 9 1 | 6364 9 1 | 6365 9 1 | 6368 9 1 |
| 6370 9 1 | 6371 9 1 | 6372 9 1 | 6373 9 1 |
| 6380 9 1 | 6383 9 1 | 6384 9 1 | 6387 9 1 |
| 6390 9 1 | 6391 9 1 | 6393 9 1 | 6394 9 1 |
| 6398 9 1 | 6400 9 1 | 6401 9 1 | 6402 9 1 |
| 6403 9 1 | 6404 9 1 | 6405 9 1 | 6410 9 1 |
| 6411 9 1 | 6412 9 1 | 6421 9 1 | 6422 9 1 |
| 6423 9 1 | 6424 9 1 | 6431 9 1 | 6432 9 1 |
| 6433 9 1 | 6434 9 1 | 6441 9 1 | 6442 9 1 |
| 6443 9 1 | 6444 9 1 | 6447 9 1 | 6450 9 1 |
| 6451 9 1 | 6453 9 1 | 6454 9 1 | 6456 9 1 |
| 6459 9 1 | 6460 9 1 | 6461 9 1 | 6463 9 1 |
| 6469 9 1 | 6471 9 1 | 6472 9 1 | 6473 9 1 |
| 6474 9 1 | 6481 9 1 | 6482 9 1 | 6483 9 1 |
| 6484 9 1 | 6485 9 1 | 6486 9 1 | 6488 9 1 |
| 6490 9 1 | 6492 9 1 | 6493 9 1 | 6494 9 1 |
| 6495 9 1 | 6498 9 1 | 6501 9 1 | 6502 9 1 |
| 6503 9 1 | 6509 9 1 | 6550 9 1 | 6551 9 1 |
| 6552 9 1 | 6553 9 1 | 6554 9 1 | 6555 9 1 |
| 6560 9 1 | 6594 9 1 | 6600 9 1 | 6601 9 1 |
| 6603 9 1 | 6605 9 1 | 6606 9 1 | 6607 9 1 |
| 6608 9 1 | 6609 9 1 | 6610 9 1 | 6612 9 1 |
| 6615 16 1 | 6620 9 1 | 6621 9 1 | 6623 9 1 |
| 6624 9 1 | 6630 9 1 | 6631 9 1 | 6633 9 1 |
| 6634 9 1 | 6635 9 1 | 6640 9 1 | 6641 9 1 |
| 6642 9 1 | 6643 9 1 | 6644 9 1 | 6645 9 1 |
| 6646 9 1 | 6647 9 1 | 6648 9 1 | 6649 9 1 |
| 6650 9 1 | 6651 9 1 | 6652 9 1 | 6653 9 1 |
| 6654 9 1 | 6655 9 1 | 6656 9 1 | 6657 9 1 |
| 6658 9 1 | 6659 9 1 | 6660 30 1 | 6661 9 1 |
| 6662 9 1 | 6663 9 1 | 6664 9 1 | 6665 9 1 |
| 6666 9 1 | 6667 9 1 | 6668 9 1 | 6669 9 1 |
| 6670 9 1 | 6671 9 1 | 6672 9 1 | 6673 9 1 |
| 6674 9 1 | 6675 9 1 | 6676 9 1 | 6677 9 1 |
| 6678 9 1 | 6679 9 1 | 6680 9 1 | 6681 9 1 |
| 6682 9 1 | 6683 9 1 | 6685 9 1 | 6699 9 1 |
| 6700 9 1 | 6701 9 1 | 6702 9 1 | 6703 9 1 |
| 6704 9 1 | 6705 9 1 | 6706 9 1 | 6707 9 1 |
| 6708 9 1 | 6709 9 1 | 6710 9 1 | 6711 9 1 |
| 6712 9 1 | 6713 9 1 | 6714 9 1 | 6715 9 1 |
| 6719 9 1 | 6720 9 1 | 6721 9 1 | 6723 9 1 |
| 6724 9 1 | 6725 9 1 | 6726 9 1 | 6727 9 1 |
| 6728 9 1 | 6729 9 1 | 6730 9 1 | 6731 9 1 |
| 6732 9 1 | 6733 9 1 | 6734 9 1 | 6740 9 1 |
| 6741 9 1 | 6750 9 1 | 6751 9 1 | 6770 9 1 |
| 6777 9 1 | 6789 9 1 | 6800 9 1 | 6801 9 1 |
| 6802 9 1 | 6803 9 1 | 6804 9 1 | 6805 9 1 |
| 6806 9 1 | 6808 9 1 | 6810 9 1 | 6811 9 1 |
| 6812 9 1 | 6815 9 1 | 6820 9 1 | 6821 9 1 |
| 6822 9 1 | 6823 9 1 | 6824 9 1 | 6825 9 1 |
| 6826 9 1 | 6827 9 1 | 6830 9 1 | 6831 9 1 |
| 6832 9 1 | 6833 9 1 | 6840 9 1 | 6841 9 1 |
| 6842 9 1 | 6843 9 1 | 6850 9 1 | 6851 9 1 |
| 6852 9 1 | 6860 9 1 | 6861 9 1 | 6862 9 2 |
| 6863 9 1 | 6864 9 1 | 6865 9 1 | 6866 9 1 |
| 6867 9 1 | 6870 9 1 | 6888 9 1 | 6890 9 1 |
| 6900 9 1 | 6901 9 1 | 6902 9 1 | 6903 9 1 |
| 6904 9 1 | 6910 9 1 | 6911 11 1 | 6912 9 1 |
| 6913 9 1 | 6915 9 1 | 6916 9 1 | 6917 9 1 |
| 6918 9 1 | 6919 9 1 | 6920 9 1 | 6921 9 1 |
| 6922 9 1 | 6923 9 1 | 6924 9 1 | 6925 9 1 |
| 6926 9 1 | 6927 9 1 | 6928 9 1 | 6929 9 1 |
| 6930 9 1 | 6931 9 1 | 6933 9 1 | 6934 9 1 |
| 6935 9 1 | 6936 9 1 | 6937 9 1 | 6938 20 1 |
| 6939 9 1 | 6940 11 1 | 6941 9 1 | 6943 9 1 |
| 6949 9 1 | 6950 9 1 | 6951 9 1 | 6952 14 1 |
| 6953 40 1 | 6954 9 1 | 6955 9 1 | 6961 9 1 |
| 6970 9 1 | 6972 9 1 | 6973 9 1 | 6981 9 1 |
| 6982 9 1 | 6983 9 1 | 6984 9 1 | 6987 9 1 |
| 6988 14 1 | 6990 16 1 | 6991 9 1 | 6992 9 1 |
+===========================================================================+

AMO-BERUM-111 CLASS OF SERVICE SWITCHOVER
DISPLAY COMPLETED;

 
That all looks good.
If you look at COS 9
DIS-COSSU:COS,9;
To see if there is anything there.

Also at this stage maybe you could
REG everything to do with the extension
(SBCSU,SDAT,ZIEL,TAPRO,PERSI)
Delete the extension and add it back in again.

Also just wondering if there is anything wrong with the DIMSU
can you please
T-DIMSU;

Regards
 
Also
DIS-DIMSU;

to see if anything is 'maxed out'
 
Here :)

<DISPLAY-COSSU:TYPE=COS,COS=9;
DISPLAY-COSSU:TYPE=COS,COS=9;
H500: AMO COSSU STARTED
+------+----------+---------+---------+---------+----------+
| COS | VOICE | FAX | TTX | VTX | DTE |
+------+----------+---------+---------+---------+----------+
| 9 |>STATIONS COS1 WITH TRACE |
| | TA | TA | NOCO | NOCO | NOCO |
| | TNOTCR | TNOTCR | NOTIE | NOTIE | NOTIE |
| | RKOABS | | | | |
| | CDRC | | | | |
| | COSXCD | | | | |
| | TRACE | | | | |
| | NOANSA | | | | |
| | FWDNWK | | | | |
| | FWDBSY | | | | |
| | FWDECA | | | | |
| | FWDFAS | | | | |
| | FWDBAS | | | | |
| | FWDDIR | | | | |
| | FWDEXT | | | | |
| | FWDBAR | | | | |
| | MCIDM | | | | |
| | MCIDA | | | | |
| | | | | | |
+------+----------+---------+---------+---------+----------+

<TEST-DIMSU:;
TEST-DIMSU:;
H500: AMO DIMSU STARTED
H01: CC: 96 % OF THE TOTAL STATIC MEMORY AREAS AND 96 % OF THE
TOTAL DYNAMIC MEMORY AREAS RESERVED FOR THE FLEXAMA WILL BE USED.
(UP TO 20% OF THE MEMORY MAY NOT BE AVAILABLE IF IT IS HEAVILY
FRAGMENTED).
H01: LTG: 86 % OF THE TOTAL STATIC MEMORY AREAS AND 92 % OF THE
TOTAL DYNAMIC MEMORY AREAS RESERVED FOR THE FLEXAMA WILL BE USED.
(UP TO 20% OF THE MEMORY MAY NOT BE AVAILABLE IF IT IS HEAVILY
FRAGMENTED).

AMO-DIMSU-111 DIMENSIONING OF FEATURES, SWITCHING UNIT
TEST COMPLETED;
<


<DISPLAY-DIMSU:TYPE=LTG;
DISPLAY-DIMSU:TYPE=LTG;
H500: AMO DIMSU STARTED
+------------------------------------------------------------+
| LTG MAX- SYS- |
| USED USED ACTUAL | STD MAX |
| GPIDX : 236 236 800 | 800 4000 |
| LINES : 781 781 8000 | 8000 8000 |
| PORTS : 708 742 2688 | 2688 2688 |
+------------------------------------------------------------+
| TERMINALS: |
| DIGILTG : 16 16 2000 | 2000 4000 |
| OPTLTG : 16 16 3600 | 2000 4000 |
| OPTDSS : 16 16 5400 | 3000 28000 |
| D260LTG : 0 0 0 | 0 2688 |
| API : 0 0 0 | 0 4000 |
| |
| TRUNK AND TIE-LINE CIRCUITS: |
| TRKLTG : 1 1 960 | 960 2688 |
| |
| CAPACITY STAGE CONFIGURATION: |
| CRILTG : 0 0 576 | 135 1344 |
| |
| DERIVED PARAMETERS: |
| DTILTG : 476 476 3095 | 3095 5376 |
| DILTG : 17 17 2240 | 2240 2688 |
| CRDH : 1 1 240 | 240 1344 |
| DTITMD : 2 12 1080 | 1080 4032 |
| DTIS0 : 0 0 692 | 162 1613 |
| DHDBUF : 0 0 0 | 0 0 |
| |
+------------------------------------------------------------+

<DISPLAY-DIMSU:TYPE=CC;
DISPLAY-DIMSU:TYPE=CC;
H500: AMO DIMSU STARTED
+------------------------------------------------------------+
| CC MAX- SYS- |
| USED USED ACTUAL | STD MAX |
| CCIDXS : 315 319 1500 | 1500 4000 |
| CCIDXD : 358 358 1500 | 1500 4000 |
+------------------------------------------------------------+
| STATIONS: |
| STN : 487 487 3600 | 2000 4000 |
| |
| TERMINALS: |
| SET400 : 0 0 0 | 0 4000 |
| SET500 : 0 0 0 | 0 4000 |
| DIG260 : 0 0 0 | 0 2688 |
| DIGEXP : 0 0 0 | 0 4000 |
| OPTCC : 31 31 1000 | 2000 4000 |
| OPTEXP : 0 0 1800 | 1000 24000 |
| ATND : 1 1 16 | 8 64 |
| ES : 0 0 180 | 100 2000 |
| ESSTN : 1 1 1080 | 600 4000 |
| S2PP : 0 0 2 | 2 30 |
| |
| TRUNK AND TIE-LINE CIRCUITS: |
| DIBR30 : 1 1 16 | 16 340 |
| TRK : 12 12 960 | 960 2688 |
| |
| DIAL PLAN: |
| DPLNCD : 195 195 800 | 800 32000 |
| DPLNGR : 0 0 275 | 275 32000 |
| |
| DEVICE SEARCH: |
| RTE : 13 17 826 | 488 3166 |
| MG : 13 17 538 | 328 2167 |
| SG : 18 18 506 | 296 2000 |
| ATNDGR : 1 1 10 | 8 16 |
| HT : 1 1 288 | 160 999 |
| HTCQB : 0 2 1440 | 800 5000 |
| |
| SUBSCRIBER FEATURES: |
| NAME : 86 87 3000 | 3000 8000 |
| ORG : 0 0 1800 | 1000 5000 |
| COS : 15 50 600 | 600 1000 |
| SPDI : 401 401 600 | 200 4000 |
| SPDCL : 2 2 16 | 16 16 |
| SPDCD : 200 200 1000 | 1000 16000 |
| CBK : 0 8 720 | 400 10000 |
| REMIND : 0 23 3600 | 2000 4000 |
| PUGR : 62 200 255 | 255 1000 |
| FWDNWK : 0 0 360 | 200 8000 |
| ID : 26 26 5400 | 3000 20000 |
| CPB : 2 18 1000 | 1000 2000 |
| SILI : 2 30 5100 | 3500 11500 |
| COSTI : 1 13 1000 | 1000 2000 |
| PINBUF : 0 0 360 | 200 4000 |
| DSS1DIV : 0 0 2000 | 2000 4000 |
| CUGPROF : 0 0 20 | 20 200 |
| |
| DIGITE FEATURES: |
| DSS : 13 15 5400 | 3000 8000 |
| DSSNA : 36 36 4000 | 4000 16000 |
| KEYSYS : 20 20 1080 | 600 4000 |
| CALLOG : 15 15 600 | 600 4000 |
| |
| ATTENDANT CONSOLE FEATURES: |
| ATNDCQ : 10 10 63 | 63 255 |
| NSTN : 0 0 30 | 30 256 |
| |
| TRUNK FEATURES: |
| MFCVAR : 0 0 10 | 3 10 |
| DSPMOD : 0 0 400 | 400 32000 |
| DPDSPMOD: 0 0 400 | 400 32000 |
| LDPLN : 29 47 200 | 200 10000 |
| LDPLNC : 0 0 20 | 20 2048 |
| LODR : 7 10 512 | 512 4096 |
| SYNAN : 0 0 500 | 500 3200 |
| LROUT : 10 29 1024 | 1024 16384 |
| FORMTAB : 0 0 1000 | 1000 10000 |
| VOICO : 0 0 60 | 28 420 |
| NX64EL : 0 0 0 | 0 0 |
| |
| NETWORK FEATURES: |
| BLK100 : 57 57 200 | 200 8000 |
| RSTCON : 0 0 50 | 50 10000 |
| TEAMCONN: 0 0 108 | 60 400 |
| DSS1SCRD: 0 0 0 | 0 10000 |
| DSS1SCRP: 0 0 0 | 0 10000 |
| REMPUGR : 3 3 1500 | 1500 10000 |
| |
| DATA FEATURES: |
| APPL : 0 0 98 | 98 98 |
| ECCS : 0 0 5 | 5 50 |
| ACDMON : 0 0 0 | 1000 5000 |
| DCIPAR : 0 0 20 | 20 255 |
| MOPPAR : 0 0 5 | 5 255 |
| WSPROT : 0 0 0 | 0 4000 |
| WSDATA : 0 0 0 | 0 4000 |
| INFO : 20 20 600 | 3000 10000 |
| DPINFO : 2 2 256 | 600 2000 |
| |
| CAPACITY STAGE CONFIGURATION: |
| PERMDL : 63 63 320 | 160 1500 |
| CRICC : 0 0 135 | 135 1344 |
| COMCPB : 0 1 64 | 64 64 |
| WAML1 : 0 0 1 | 1 32 |
| WAML2 : 0 0 15 | 7 112 |
| STMA : 0 0 15 | 7 112 |
| STMACIR : 0 0 480 | 224 3584 |
| TFAGRP : 0 0 120 | 56 896 |
| |
| ACD FEATURES: |
| ACDAGT : 0 0 0 | 256 4000 |
| ACDGRP : 0 0 0 | 128 255 |
| ACDLOGON: 0 0 0 | 256 750 |
| ACDPRIM : 0 0 0 | 128 2000 |
| ACDCQ : 0 0 0 | 1500 7500 |
| ACDRCG : 0 0 0 | 512 1020 |
| ACDRT : 0 0 0 | 300 4000 |
| ACDRTX : 0 0 0 | 900 16000 |
| ACDSHIFT: 0 0 0 | 300 20000 |
| ACDMONID: 0 0 0 | 256 5000 |
| ACDCALEN: 0 0 0 | 3200 32000 |
| GDTR : 0 0 2000 | 2000 16000 |
| DNI : 0 0 2000 | 2000 16000 |
| DPDNI : 0 0 2000 | 2000 32000 |
| GENBUF : 0 0 256 | 256 5000 |
| |
| DERIVED PARAMETERS: |
| LODEN : 737 738 17687 | 10351 20000 |
| DIBR3 : 18 18 2240 | 2240 2688 |
| SU : 33 33 3626 | 2016 4080 |
| NWBCHL : 37 37 480 | 480 10200 |
| LODS0 : 0 0 692 | 162 1613 |
| LODTMD : 9 11 720 | 720 4032 |
| CPDBUF : 1 10 600 | 1000 2000 |
| CRCP : 2 2 240 | 240 1344 |
| |
+------------------------------------------------------------+

AMO-DIMSU-111 DIMENSIONING OF FEATURES, SWITCHING UNIT
DISPLAY COMPLETED;

 
But as I am telling you, the problem is with the codes I dila from the phone
 
All still looks good there.
Yes I know the problem is with the codes you dial from the phone.

How many cards of digitals do you have,
I mean does it happen on digital extensions that are on one card only and not on another.

It is indeed an unusual problem.
 
There is only one digital card.
and I did restart the whole system, but with no change unfortunately.
 
Can you borrow another card to rule that out ?
It is odd that the analogues are working but not the digitals.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top