Problems connecting two routers together!!! 1

[sothpaw]

First off I have a Cable Modem and a DSL modem going into my Xincom Dual Router (XC-DPG402). I also have a Linksys WRT54G Wireless Router, I have cable connected from Port 2 of the Xincom Router going to the Uplink Port of the Linksys Wireless Router. I have gone into the Admin Part of the Linksys (192.168.1.1) to change it from a Gateway setting to a Router setting. I was also told to Disable the DHCP setting as well, which I have done. The problem is I cannot connect to the Internet from the Linksys Wireless Router. What are the steps I need to take to be able to surf the Internet on a Wireless computer from the Linksys Wireless Router? Please HELP...

J

 

[MADMAX7147]

in the setup for your wireless router try setting it up as an access point. if this option is available. this does work with belkin products as i have a simalar setup working and supossedley they use the same electronics. set the linksys ip.
to the same subnet as you'r xincom and let it asign ip's
post if this helps.

 

[MADMAX7147]

also do not use the wan port on the linksys router

 

[bcastner]

http://www4.tomshardware.com/network/20030716/index.html

 

[MADMAX7147]

bcastner you'r awsome way better explaination.