Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problems connecting to PBX 9600 remotely

Status
Not open for further replies.

Tech2atross

Programmer
Nov 16, 2005
10
US
I have a computer directly connected to my PBX, but I need to access the PBX from a remote location also. I already installed and configured a modem at the pbx. Now the company that I hire to service my system can and has accessed my system using EMML rel.15. The problem is that I can't access it remotely. I have robotics sportster modems at each end. I set up and configured my modem exactly like the service company did. I done the EMML set up the same too. I used the same modem as they did. The only thing I have different is my computer, they are using windows 2000 and I am using 98. I don't see why that would make a diff.,but it might. My remote modem is connecting with the other modem but will not let me get in to the PBX and then it shows "connection failure". I did everything like they did..could the problem be the windows 98 driver? I tried the US Robotics driver too. The service co. used the existing driver with the windows 2000. Help!!!!
 
I access many F9600 I use Procom Plus and I use MML instaed of EMML connect thru Procom would be 7 even and 1 9600baud
you need to know the commands such as dis slt,,xxxx
 
I can set it up that way and get it to work, but that's not what I want. I want the EMML. I am going to try using windows 2000, but I wish I could get this computer to access it with windows 98.
 
Set the USR modems to lock down to 9600 baud.
AT&N6&U6Y0s1=1&w0, dip switches 1,3,8 down.
ATI4 or ATI5 will show the modem settings.
 
Thank you ksphoneman!!!!! I really appreciate your help. It is working now. I knew I was missing something small, but I could not get it. Nobody else could help me either. Once again, THANKS!!!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top