Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problemed Extensions

Status
Not open for further replies.

KalboKowboy

IS-IT--Management
May 24, 2007
9
0
0
US
I have two extensions here with problems.

Probably the easier of the two problems is that one phone, the message(voicemail) speed dial button on my DTR-8D phones won't dial extension 8000.


The other extension won't go past the "Initialize" message.
And I've wired up a phone directly to the punchdown block below the PBX and it still won't get past "Initialize".
 
Are you sure the block is correct? I have see cases where the tech switched the brown and orange pair.

I am sure you tried another phoneset.

 
OZ is probably on target, Check 1204 for the stations that do not work against one that does. If different for a reason then 5115 needs to be set for the different tenant.

Mextera
 
2000 IPS

I haven't had a chance to look at that command yet. My computer support duties have been keeping me busy.

Thanks,
John
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top