Probleme MIran audio file

[Mlck]

Hi all

That's my first Miran install, I create the ran route trunks chanel and now i'm stuck, I trie to upload the wav file in the Miran card with PCMCIA and I always get this message
(((Command : CAL_ADD 0 A:AMONO.WAV ALWAYS
Error: Invalid Filename Extension - must be .MCF, .ALW or .MLW)))

What can I use to format in those .MCF .ALW .ULW

wathever the file format I use wich is:
.WAV 8k MONO
.WAV ULAW MONO
.WAV ULAW MONO 64bit
.WAV ALAW MONO
.WAV ALAW MONO 64bit

I'm using Goldwave to format the wav file
and the miran is MC8 nt0966dae5

Thanks

 

[dowlingp]

HI,
You first need to move the file from the PCMCIA card from A: to C: and then use the conversion utility within the MIRAN to convert the file to .ALW.

If you have the Ethernet set up, then the easiest way is to use the WEB browser to install and convert the file and then add to your calender assignments.

you have done the right thing using goldwave the file should be 8k mono 16khz

 

[danielbernardibr]

..ok...

try first convert to wav 8 bits mono PCMA.

after that, miran can convert to alw from pcmcia slot.

msn: ngensysatlc@hotmail.com

 

[bigindian65]

file should be

64kbps
8 bit
1mono
8 khz
u-law

then the Miran will convert

Mato' Was'aka

 

[Mlck]

Thanks all, it's working now