Problem with Winfiol 5.1 version

[uxio69]

I have a Toshiba A75-S231 laptop (P4 HT 3.33GHz, 1,5 GB RAM), windows xp sp2. I use winfiol 5.1 to configure 3 MD-110 (BC 8, 9 and 10). I use a dial-up connection.

I have a serious problem. The laptop works very well, but 10 minutes after I'm using winfiol, appears a windows error message in a blue screen. This message is fast, and I can't read all message, because the laptop reboots automatically.

When the windows xp starts again, I send the error report message to Microsoft, and it´s informed that the problem is caused by unknown drive.

I have this problem only when the winfiol is running.

What I need to resolve this problem?

Thanks!

Uxio69

 

[whosrdaddy]

use winfiol 6.4 with windows xp and you wont have any problem...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[uxio69]

Hi Whosrdaddy.

About your answer, I have two questions:

1) Is the winfiol 6.4 full compatible with MD-110 BC 8, BC 9 and BC 10 versions?

2) Where can I donwload the Winfiol 6.4?

Thanks,

Uxio69

 

[whosrdaddy]

winfiol 6 is inluded in SAM toolbox and is compatible with all MD versions. samtb is not free ask your local E/// provider...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[uxio69]

Hi Whorsrdaddy,

Thanks for all information.

Regards,

Uxio69