SEE ENXT POST
I have multiple sets that send out only the ext# as caller id.
I know this is normally controlled by CLID table
So I have a DN that works correctly when the TNB has key 01 SCR 1994 0 it gives the proper 10 digit caller ID
When I add that DN on one of the sets that is sending out the wrong info KEY 01 SCR 1994 0 it gives the caller ID of 994-000
Can someone give me a clue to what settings are on the TNB that may be causing this.
I did a side by side comparison and the only differences are
Working RNPG 7 non working RNPG 3
Working CLS has IRA non working IRD
Working non working LPK 5
thank you in advance
Greg
I know this is normally controlled by CLID table
So I have a DN that works correctly when the TNB has key 01 SCR 1994 0 it gives the proper 10 digit caller ID
When I add that DN on one of the sets that is sending out the wrong info KEY 01 SCR 1994 0 it gives the caller ID of 994-000
Can someone give me a clue to what settings are on the TNB that may be causing this.
I did a side by side comparison and the only differences are
Working RNPG 7 non working RNPG 3
Working CLS has IRA non working IRD
Working non working LPK 5
thank you in advance
Greg