Problem with initial load 2

[DanailDS]

Hello Colleagues,
we need some help regarding initial load procedure
We have a test system MD110 BC12, SP7 with NIU2.
During initial load when starting loading lim disposition table we got error message “Already assigned”(on the first row CNLDI) and could not continue with the lim disposition table, after restart the LPU display is showing state 5010.
After the restart we couldn’t connect via Winfiol, only with MDDT.
We tried to manually add directories, transfer files however without success - transfer breaks with "Flash disk full" message
Could you, please advise us how to proceed
Thank you

 

[inlsp08]

hi
you should :
Then copy the INL folder to the MD. Path /sysn/usr1/ses/dr/inl. Should look like this:

fidapath=/sysn/usr1/ses/dr/*.*;
FILE/DIRECTORY DATA
FILE FITYPE LINKS USERID FISIZE DATE
REL1 D 1 2 160 28DEC13 10:31
ADD D 1 2 32 28DEC13 12:07
INL D 1 2 48 12FEB13 14:51
END
and this:

<fidapath=/sysn/usr1/ses/dr/inl/*.*;
FILE/DIRECTORY DATA
FILE FITYPE LINKS USERID FISIZE DATE
P D 1 2 4576 12FEB13 14:50
D D 1 2 4592 12FEB13 14:37
NECPUF F 1 2 1216 12FEB13 14:51

after restart system show 101 load lim disp and lidai .........


-----------------------------------------------------------------------------
debt? or pay who know!!!(signa)!

 

[snor]

If REL1 and REL2 are on Disk, delete this directories and try Initial load again, with limdispo table, and so on .....

P.S.
"Flash disk full" .. clean your FlashDisk, maybe to many files of call-logging or traffic-recording will waste your disk space.

best regards,
Norbert

 

[DanailDS]

Hello,
We try to format, but we get the following:
niux > atfmt 0
Formatting sector 0 - 7a800
0% done
5% done
10% done
15% done
20% done
25% done
30% done
35% done
40% done
45% done
50% done
55% done
60% done
65% done
70% done
75% done
80% done
85% done


stop formating and LPU display 4122,
The system hangs and after restart we have again LPU code 5010.
Could the flash be damaged?

Please Help

 

[whosrdaddy]

DanailDS,

that's because the system is trying to load while you are formatting the disk.
Pull out the LPU/LSU and then format disk using niux commands and load INL via FTP.

/Daddy

-----------------------------------------------------
Helping people is my job...

 

[DanailDS]

Thank you whosrdaddy!
Thank you snor!
Thank you inlsp8!

The trick with pulling the LPU/LSU during FTP transfer was very very helpfull

Thank you,
Danail