Problem with G350 CLI

[Donkablo]

Hello,

I have problem with gateway G350. I cant login into CLI by LAN and WAN port(tested ssh and telnet). Also my serial port is physically damaged. I know addresses to lan and wan port and can ping it. All was good till i changed manualy startup-config file and upload it to the gateway. In startup-config i changed only rule about VLan (address and mask). I can not restore gateway to default settings because serial port is dead and lan and wan port will be clear after this action. Any idea?

BR
Donkablo

 

[lopes1211]

use the services port. it's address never changes. 192.11.13.6

-CL

 

[AvayaTier3]

From s8300 linux CLI if you have s8300 in v1 of the g350:

ssh root@127.1.1.11

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]