Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem with FCN=AANS

Status
Not open for further replies.
DEIVIDOS

DEIVIDOS

Technical User
Nov 14, 2006
75
0
0
ES
hello,

I have a problem with customer in TSW SP3, i have program in one key of the DBC 223 the fcn=AANS for automatic call acceptance but this is not working.

Any ideas.

thanks in advance

BR deividos
 
Sort by date Sort by votes
FCN=AANS works together with CALALT=5. Also check your parnum 120. This parnum should be parval = 0. Also this feature will work if external line has clearing signal on analog trunks, but will have no trouble if using ISDN or CAS trunks. Cheers...
 
Upvote 0 Downvote
thanks for all, now all works fine

deividos
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

neizvestnyi_andr
  • Locked
  • Helpful tip
BMS with browser problem! 2
Replies
0
Views
60
neizvestnyi_andr
neizvestnyi_andr
eliseo1024
  • Locked
  • Question
Problem with VLAN on Mitel 6865i
Replies
0
Views
55
eliseo1024
eliseo1024
Soykot
  • Locked
  • Question
Hi, I have an issue with mitel mx-
Replies
4
Views
93
LuigiEspo
L
Vitera
  • Locked
  • Question
Help with MX ONE problem
Replies
3
Views
90
Vitera
Vitera
sayoudbilel
  • Locked
  • Helpful tip
problem adabdation ligns analogique with equibment msan chinoise
Replies
0
Views
31
sayoudbilel
sayoudbilel

Part and Inventory Search

Sponsor

Back
Top