Problem with ELU-32/1

[Mirco68]

hello,
I have a problem with the ELU-32 / 1 on MD110 CXP1010115/4/TSWSP02/R3A version .
I find the following alarm
CLASS: 2
60 FAULT CODE ALARM WITHOUT CLASS
DATE TIME ALP NOIF UNIT EQU INF1
17AUG11 11:42:09 51 1 001 TLP65 -*-**-** 361
with the following program units alarmed
<HIMDP;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
17AUG11 14:50:47
DIAGNOSTICS FROM LIM 001, LAST HIRE: 12AUG11 16:42:10

ERROR CODE DATE TIME
14:48:18 17AUG11 H'21
INVALID DATA AT TIME MEASUREMENT Centralized
ENTER
SWSW A-LEVEL SIGNAL REMCTMA (H'003B)
FROM TLP65 (H'3BE) EXE A IN LIM 001
TO PRP (H'004) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 6
WITH 0 1 2 3 4 5 6 7 8 9
AND BE 000 03 08 08 00
STACK ADDRESS = 0202BE50
SIGNAL SEND ADDRESS = 0203390C

Does anyone know an answer to my problem.??
Tanks.

 

[Satellite1900]

any speech-quality, no-speech, or one-way-speech complaints related to IP traffic handled by this board?

\Satellite1900

 

[Satellite1900]

and please print the firmware of the elu32 and spu4

\Satellite1900

 

[Mirco68]

not any speech, but one time one-way-speech and very often no speech.
i must specify that system receive a call from a another MD110 that reroutes all telephone traffic on the network IP route.

thanks!

 

[Mirco68]

this is print of the two ELU-32 and SPU4:

SPU4 ROF1375430/1 R2A
CAA 158 0023 R5B EXE

ELU32 ROF1375428/1 R6A
CAA 158 0022 R7A EXE

ELU32 ROF1375428/1 R6A
CAA 158 0022 R7A EXE

 

[whosrdaddy]

Mirco,

2 remarks here:
- ELU32 is phased out and you should replace it with IPLU (there are some known problems with ELU32).
- same remark as in the other thread, upgrade your system to the latest SP.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Mirco68]

In the system is present IPLU and it is connected to ESU (onebox).

How can I use the IPLU for IP networking in place of more LIM ELU32?

The system consists of 4 MD110 IP networked with the use of VoIP communications between different locations.

Thanks.

 

[Pana64]

Hello
Micro68,

I see two problems

1 ° When there is alarm code 60, this indicates that the alarm code is not defined, the INF1 field indicates which is the code that should be defined. In this case the code would be 361.

2 ° The system is in MX-ONE TSW SP2

My suggestion to update the system MX-ONE TSW SP7, this version fixes the undefined code 361 and several flaws with IP Networking.

I have several customer who have the same scenario that presents and works correctly with MX-ONE TSW SP7 and ELU32/1

\pana64