i've tried to configure cil over ethernet in MXONE (NIU2)but
it dosn't work. please show me the mistake where it is.
I've done:
ioeqi:iodev=cil2,equ=1-2-10-4,type=network,usage=out;
ionci:iodev=cil2,rport=7000,ip=10.12.8.110;
cldfi:file=taxlan,iodev=cil2,user=cil-2;
clohi:file=taxlan,form=1,dmpsiz=1;
clodi:file=taxlan,dial=09;
cltgi;
i've also:
cldfp;
taxlan act
iodev/path user device state priority
cil2 cil-2 passive c
at th pc where i wante to get cil report i used HyperTerminal connection with ip adress 10.12.8.2 (NIU ip
adress) and number port 7000. the ip adress of the pc is 10.12.8.110
now when i try to open a connction i get a messge "imposible to connect to 10.12.8.2" however i can ping this adress from the pc!!
where is the problem???!!!
it dosn't work. please show me the mistake where it is.
I've done:
ioeqi:iodev=cil2,equ=1-2-10-4,type=network,usage=out;
ionci:iodev=cil2,rport=7000,ip=10.12.8.110;
cldfi:file=taxlan,iodev=cil2,user=cil-2;
clohi:file=taxlan,form=1,dmpsiz=1;
clodi:file=taxlan,dial=09;
cltgi;
i've also:
cldfp;
taxlan act
iodev/path user device state priority
cil2 cil-2 passive c
at th pc where i wante to get cil report i used HyperTerminal connection with ip adress 10.12.8.2 (NIU ip
adress) and number port 7000. the ip adress of the pc is 10.12.8.110
now when i try to open a connction i get a messge "imposible to connect to 10.12.8.2" however i can ping this adress from the pc!!
where is the problem???!!!