problem with change hour 1

[allanebol]

Hi all,

I'm a technicien for a CS1000 release 6.0
We change hours here but into the IPphones it's not the current time.
I verify into the Call Server LD 2 and it's configuring correctly.
I verify into the Primary Security administration if I configure the NTP and it's done.

But the IP phones don't synchronize with the current time.

Somebody has an idea where i could search and fix the problem ?

Many thanks for giving me a hand
Allan

 

[mlozoveanu]

Check the time on the SS

 

[allanebol]

Thanks
do you know the command that i must to use to check ?
or the NTP that i could check all the commands ?

 

[mlozoveanu]

datetimeconfig [--show]|[--help]
datetimeconfig with “--show” option prints existing settings.
datetimeconfig with “--help” parameter shows information about the command.

NTP NN43001-730, 04.02, but is for 7.5, should be similar for 6.0

 

[allanebol]

thanks i check and it's good also but the IPphone still has a problem with time and date

 

[mlozoveanu]

if you reset one terminal, the date and time was changed?

 

[allanebol]

I will tell you back when the customer will reset the terminal

 

[allanebol]

Unfortunely, the time is still in winter time.
there's not anything about the zone that the IPphone use that i must indicate that it's using the GMT+1 ?

 

[allanebol]

thanks a lot mlozoveanu
I find the solution... it's about the zone time that's why