I am trying to install SCO Open Server 5.0.5 Rel 2.4
on a Dell PowerEdge 1500SC Server fitted with a
PERC3/SC controller.
I have obtained 2 PERC btld files from the Dell web site,
(percsco.exe and perc2sco.exe) and I have similar problem
with both files.
With percsco.exe
When SCO starts to list the detected hardware it states;
Warning No PERC adaptor found. PERC driver not loaded.
Warning hd: No root disk controller was found.
With perc2sco.exe
When SCO starts to list the detected hardware it states;
Warning hd: No root disk controller was found.
I have tried with the emulation set to I20 and MASS STORAGE
Has anybody had any experience of installing sco on a PERC3/SC raid controller?
Regards
Tony Hickinbottom