Problem with bcm450 R6 and 2 GASM8

[gleduc]

Hi all
We have a problem with a customer who have:
BCM450 R6 with lastest patch
RAID enable
Expantion Cabinet
2 x GASM8
and other module

The problem is when power failure or reboot , the 2 GASM swap!
Example: we have extention 2601 on port 5201 and extention 5701 on port 2001
after the reboot, extention 2601 will go on port 2001 and extention 5701 on port 5201.

We try to install the 2 GASM in the expantion cabinet: same problem.

Anyone have this problem?

Thanks
GL

 

[cook1082]

Try this to solve the power problem. When it is running ok turn set relocation on then swap the amphonal cables then we it looses power the sets will be where the system put them after the outage. This is one way to fix it even though it doees not solve why it does it.

 

[gleduc]

Hi
The set relocalation will work only with digital set, it's doesn't work with analog set...

GL