Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem using VPN to access office network

Status
Not open for further replies.

yhchooi

MIS
Nov 1, 2001
40
MY
We receive error msg "11:20:08.466 recv fail rlen -1 err 10054 2746" from the log viewer of the VPN client. This error appeared when it failed to established a tunnel to our office.

Appreciate if someone could exam on this error message.

Thanking in advance.
Best Regards
YH Chooi
 
Ntr0P (MIS)

Thanks for your reply.

We managed to work with the ISP to resolve the issue. The problem seem to be at the ISP end - very funny ;-)
Best Regards
YH Chooi
 
For future reference, if anyone is interested, IPsec uses IP protocols 50 (AH) and 51 (ESP), as well as UDP port 500 to communicate.

I had a similar problem with an ISP in Austria that was blocking IPsec (they claimed they weren't, but long story short, they were and now it works).
 
Hi,

I saw the exact error message. I am using a
SonicWall VPN Client with a Novatel card.

recv fail rlen -1 err 10054 2746

Did you ever resolve it?

Thanks,
john
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top