Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem unable to licence after upgrade

Status
Not open for further replies.

wireman50

Technical User
Jan 8, 2011
1,023
GB
Anybody had any problems upgrading from 4.2 to 5.0 PR1 with licencing failing after upgrade.

Just tried to upgrade a brand new cX with 4.2 to 5 and now it won't licence (it liceneced the 4.2 OK for the upgrade process)?

Its finding the AMC fine but says it can't validate the licence...
 
Is software assurance active?

Share what you know - Learn what you don't
 
Time and date correct, software assurance in place.

Finally gave up and re-installed from the serial port as the software installer barfed half way through a re-install try for a clean load (full install).....

Booted up and downloaded licences just fine from the MiCW.

Thanks for the input though.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top