Problem to Acces Web UI with New Mitel 69xxIP Series 3

[couscouspoulet67]

Hi to All,

I have already some phone 6920IP and 6940IP configure in MiNet with MiVoice Business System Release 8.0 SP3 PR1.
Unfortunately, I cannot access with web with IP from the phone as described in the documentation.

https://<IP

From Phone>
My Colleagues said that there is automatically set to NO (The Web Access) with the Full SIP version compatible with MiVoice 500 Systems
I Think there is a possibility to access the phone but don't find how to unlock it.
If someone as an idea ???
Many Thanks in Advance
Stephane

 

[kwbMitel]

There is a password that needs to be entered in the Security form on the MiVB

**********************************************
What's most important is that you realise ... There is no spoon.

 

[Billz66]

Also on the latest software there is a maintenance command that allows web access

this is well hidden in the 6900 Admin manual and only applies on the latest software and above

Ensure to enable the Web UI from the MiVoice Business maintenance command line and add the
following commands:
• pd send <extension> enable_web
• pd send <extension> disable_web



If I never did anything I'd never done before , I'd never do anything.....

 

[kwbMitel]

@Billz66

As soon as I confirm, you get a star

**********************************************
What's most important is that you realise ... There is no spoon.

 

[couscouspoulet67]

Many Thanks Billz66,

I will try this asap but not at office tomorrow... And let you know

Many Thanks to kwbMitel, But it wasn't my problem
I'm already aware that there is a new "parameter" in the security options to enter in the Phone Advanced Menu
In fact, you must give a password to enter in the Phone Set. This is already running by me !
It's only the web UI which is not functionning, I will try Billz66 new CLI Command.
Thanks to all

 

[Billz66]

FYI this is a Maintenace command via the ESm ( not via the console)

If I never did anything I'd never done before , I'd never do anything.....

 

[couscouspoulet67]

Thanks Billz66 ! It's Running Weel
* Enable the System Security Management : Phone Administrator Passcode (Release 8)
* Enable / Disable the web access via ESM Maintenance Command: As you said
• pd send <extension> enable_web
• pd send <extension> disable_web
* Access the Phone via

http://<Phone

IP Address>

Hope this will help someone else ...
Thnaks to All

 

[kwbMitel]

Awarding Star as promised with confirmation

**********************************************
What's most important is that you realise ... There is no spoon.